*For SpinetiX players: if the ports are open for admin, the parameters for serial number, IP address, WEBDAB port, HTTP port, and API port will be filled in automatically. There are also new configuration parameters in the main window.
To change the configuration of a screen, follow these steps:
Enter the Screens section from the main menu.
You will see a list of all the screens that have been added to the project. Select the screen you want to edit.
First, copy the serial number, and then press Edit.
If the serial number is not automatically filled in on the next screen, paste it in the appropriate field.
To edit the name of the screen, just click on the existing name and type a new one.
Choose the screen orientation and the aspect ratio:
Within the option CONTROL SWITCHING SCREEN ON/OFF, open the dropdown list and you’ll see three options:
Always on: The screen will never be automatically turned off.
From 8:30 to 21:00: The screen will turn on at 8:30 and off at 21:00 on all programmed days.
Specific schedule: To select a specific schedule for turning screens on and off:
Check the days of the week that you want the screen to turn on.
Enter the times for turning the screens on and off.
You can also select the default content that will be shown on the screen:
Press Add and you’ll see all files that have been added to the project.
Select the file to display by default and press Save. You can change or delete this content anytime.
Save your changes.